Filter
Top Products
Adjustment in YPbPr mode
To enter into YPbPr mode
Repeatedly press button on the remote control or button
on the set's panel until the screen display YPbPr, which indicates that the
set is in YPbPr mode. Connect the YPbPr terminals to Set Top Box and
make sure there is signal input.
SOURCE
Adjusting picture
Item
VOL- VOL+
Contrast
weaker
stronger
Saturation
paler deeper
Brightness
darker
lighter
Sharpness
softer
sharper
In YPbPr mode when there is correct input signal, press button and
menu appears. Use to select item and
to adjust.
MENU
PICTURE SETTING CH /
VOL+/-
56
PICTURE SETTING
Brightness
Contrast
Saturation
Sharpness
Color Temp
25
25
25
25
9300K
Adjusting Color temperature
You can select different Color temperature
to obtain correct white. Press
button, use to select
item, press the to select between
MENU
CH / Color Temp
VOL+/-
56
PICTURE POSITION
Horizontal
Vertical
25
25
Press button twice and the menu appears.
Use / to select item and to adjust.
MENU PICTURE POSITION
CH VOL+/-56
Adjusting horizontal / vertical position
When nonstandard signal input to the set
and the picture may not be in the screen
center. Now you can adjust its
and position to display correctly.
horizontal
vertical
YPbPr
<LEFT> or <RIGHT> key to change
PICTURE SETTING
Brightness
Contrast
Saturation
Sharpness
Color Temp
25
25
25
25
9300K
<LEFT> or <RIGHT> key to change
<LEFT> or <RIGHT> key to change
32
* To exit the menu, press
ENTER button.