Connect a PC
How to connect:
1. Turn on your TV, press INPUT button on the remote control to display INPUT SELECT menu, use 5/6to
select Analog RGB and then press OK to confirm.
2. Turn on your PC and check for PC system requirements.
3. Adjust the PC screen.
To Watch the PC screen
Connect a VGA cable between the VGA(D-sub) interface on the PC and the VGA input interface on the unit.
Connect an Audio cable between the AUDIO output on the PC and AUDIO input jack on the unit.
Connections (continued)
16
Connect Headphone
VGA cable
(analog RGB)
To monitor port
(15-pin D-Sub)
To audio output jack
Audio cable
(stereo mini plug)
Headphone
Insert the plug of the headphone into the TV’s Headphone jack.
When using headphone, adjust the headphone volume so as to avoid excessive levels, as hearing damage
may result.
Note: If your headphone do not match the jack, use a suitable plug adaptor.
HDMI 2
AUDIO
AUDIO
HDMI 1
DVI 2 IN
DVI 1 IN
S-VIDEO
for software
update only
RS-232
L
R