Filter
Top Products
Memorizing the Channels
18
Selecting the Tuning Band
This unit can automatically find all channels available through antenna or cable inputs, and store them in memory.
Note: Be sure to select the TV source before operation.
Before your TV can memorize the available channels, you must specify the type of signal source that is connected
to the unit. (i.e., an antenna or cable system)
Auto Channel Search
Press MENU to display the menu main page.
1
Press repeatedly to select menu.5or 6 Setup
2
Press OK or to access the submenu.4
3
Press OK or to select the Tuning Band.4
Air, Cable, Cable HRC, Cable IRC and Cable Auto can be selected.
If using antenna, select Air;
If using cable, select one of Cable/Cable HRC/Cable IRC/Cable Auto according to your local area’s cable
system. Normally please select Cable Auto. (For further band information, contact your cable service
provider.)
4
Press to select .5or 6 Tuning Band item
5
Navigate to the Setup sub-menu and highlight Auto Ch Search.
1
2
Press OK or to begin the auto channel search.
The unit will automatically search for all available TV/DTV (if
using antenna), CATV/CADTV (if using cable) program.
4
Manual Channel Set
Navigate to the Setup sub-menu and highlight Manual Ch Set.
1
2
Press OK or to open Manual Channel Set Menu sub-menu.4
After setting channels into memory, you can add or delete channels
from the default channel list as follows:
3
Use navigation buttons ( , , ) to navigate and select, use
OK button to add (the added channel will have a mark) or delete
the channel. (If you want to toggle between NTSC and ATSC,
use navigation buttons to highlight it, and then use OK to toggle.)
5 6 3or4
4
Press EXIT button to exit.
Video
Tuning Band
DTV Signal
Auto Ch Search
Manual Ch Set
Channel Labels
Air
To Move
To Select
To Exit
Audio
Setup
Feature
OK Exit
Video
Tuning Band
DTV Signal
Auto Ch Search
Manual Ch Set
Channel Labels
Air
To Move
To Select
To Exit
Audio
Setup
Feature
OK Exit
Autoprogram Menu
NTSC Channel 12
Channels Found
Progress (%)
Found
3
7
Video
Tuning Band
DTV Signal
Auto Ch Search
Manual Ch Set
Channel Labels
Air
To Move
To Select
To Exit
Audio
Setup
Feature
OK Exit
To Move
NTSCTuning Band
31
41
51
33
43
53
37
47
57
39
49
59
32
42
52
36
46
56
34
44
54
Manual Channel Set Menu
To Select
To ExitOK Exit
40
60
50
38
58
48
35
45
55
Note: if you want to stop the auto-search, press EXIT button.
Now when you use CH+/- buttons to cycle among the channels,
the deleted channels can not be selected.
Note:
l For DTV program, you can only delete the programs from the
list, you can not add it.
l You can make use of Manual Channel Set Menu to know
whether an ATSC channel exists as a sub channel.
Use OK button to toggle between
NTSC and ATSC after highlighted.