Filter
Top Products
BASIC OPERATION
10
Loading Unloading
• Push the cassette into the cassette
compartment gently. (Arrow mark at the
top)
An inverted cassette cannot be inserted.
• The cassette-in indicator lamp is lit up.
Upon inserting the cassette, the power turns on
even if the power was off as long as the DC
power cord is plugged in.
• Press the STOP/EJECT key twice on the VCP (in
PLAYBACK mode). This first press will stop the
tape. The second press will eject the tape. The
cassette-in indicator will be lit up.
• Pull the cassette out gently.
When you press the STOP/EJECT key even if the
power is off, the cassette will be ejected.
CASSETTE LOADING/UNLOADING