Filter
Top Products
www.avenview.com
20
X Start, X End, Y Start, Y End
For each display, users can define which section in the resulting mixed video should be displayed. After setup
the X Total and Y Total, users need to define the upper-left (X Start, Y Start) and bottom-right (X End, Y End)
corners for each display. The area to be displayed by default is quad view as shown.
To activate the new settings for each display, please click the “Window x” button under “Update
Parameters” section on the left of the control interface.
Enable All, Disable All, Default Layout
Clicking on “Disable all” button will make all the connected monitors have an identical display, i.e., the output
from the front end mixer. “Default Layout” will replace the current display layout with the default quad view
layout. “Enable All” button updates the connected display with the setup parameters.