Filter
Top Products
www.avenview.com
4
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
1.4 Introduction
Avenview FO-HDMI-1000M-EMI optical HDMI extension module, is designed to let digital flat panel display
extend over 1000 meters away from host based on HDMI standard by optical transmission technology. Its
small package and transmit up to four video and one low-speed lane, while simultaneously receiving one
low-speed signal, all on one multimode fiber.
- High Speed and long distance transmission by 1 channel SC type Multi-mode Fiber
- Supports resolution up to HDTV/1080P, PC/WUXGA(1920x1200)
- Transmit up to 1000m (3300 feet) at 1280 x 1024 by multi-mode SC Type one fiber optic cable
- Transmit up to 500m (1650 feet) at 1920 x 1200 by multi-mode SC Type one fiber optic cable
- TMDS video signal and EDID data is transmitted by 1 channel multimode optical fiber
- HDCP support by DDC channel
- Supports 12Bit Deep Color
- Small size for insertion into internal system
- Optional external power supply (Automatic power switch is included.)
1.5 Package Contents
Before you start the installation of the converter, please check the package contents.
- FO-HDMI-1000M-EMI Transmitter x 1
- FO-HDMI-1000M-EMI Receiver x 1
- User’s Manual x 1
1.6 Before Installation
Put the product in an even and stable location. If the product falls down or drops, it may cause an
injury or malfunction.
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high
humidity.
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it
may cause a fire.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.