Barco 6500 TV Converter Box User Manual


 
2. Access to the analyzers
2. ACCESS TO THE ANALYZERS
Overview
Removing the Top Cover
Removing the EMC plat
Particularities
Depending on the projector the procedure to access the analyzers m ay be different.
In the RSIM6 projector the top cover can be removed without removing the lens whereas in the 6500/6 400i projector the lens has
to be removed to allow cover removal.
In the images the cove r color may not always coinc ide with t he reality.
2.1 Removing the Top Cover
Location
The Top Cover is located on the Top side of the projector.
Image 2-1
Top Cover Location
Necessary Tool
Flat blade screw d ri ver 8 mm.
Be sure the Pro jecto r Handle is in the inserted position when removing the Top Cover.
How to remove the Top Cover
1. Remo ve the Lens Cover. (image 2-2)
2. Pull off the 3 rubber sealing pieces covering the Top Cover screws. (image 2-3)
Tip: Use the flat blade screwdriver to pull off / slide in the tops of the 3 rubber pieces.
3. Turn out the 3 screws connecting the Top Cover to the Projector Frame. (ima ge 2-4)
4. Remo ve the Top Cover.
5. Reverse this procedure to reinstall the Top Cover.
R5976207 ANALYZER KIT FOR G/R 6500/6400I AND SIM6(HB) PROJECTORS 01122003
5