Filter
Top Products
Installing Virtual COM Port
Manual Documentation Number: ESP901-902_0508m Chapter 6 45
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Pk – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Figure 41. The Windows Logo Testing Window
This XP/Vista feature simply indicates that these drivers have not yet
undergone the Microsoft testing procedures required to use the
Windows XP/Vista Logo on the packaging. Driver compatibility is not
affected.
Step 4: Click
Continue Anyway to proceed with the installation.
The Protocol TCP/UDP, IP Address, and Port Number will mirror the
settings of the selected serial server.
Step 5: After setting all
Serial Server serial ports as virtual COM
ports, click
Cancel on the Found Server form.
N
N
o
o
t
t
e
e
:
:
PCs may have hardware COM ports and devices such as Modems, IR
ports or USB based COM ports that are not currently connected Try
selecting a COM number above COM4 if problems occur.
The default Flow Control setting is None. RTS/CTS can be selected if
used by the application program and serial hardware. The Serial Server
must be set to match.