Filter
Top Products
232SPS24595 Manual 5
B&B Electronics -- PO Box 1040 -- Ottawa, IL 61350
PH (815) 433-5100 -- FAX (815) 434-7094
CHAPTER 4: POWER CONNECTIONS
The unit may be port-powered using DTR and RTS on the serial
port. If the 232SPS2 cannot be powered using the handshake lines,
it may be powered externally using +7 to +18 volts DC at 2
milliamps. If you are using an external supply, simply plug a 2.5 mm
plug from an appropriate DC source into the power jack on the side
of the 232SPS2 module. Power supplies are available through B&B.
(Model 232PS is recommended.)