Filter
Top Products
14
Select BRIGHTNESS,
CONTRAST, COLOUR and
SHARPNESS using theProgram
up/down
buttons.
Change the settings with the
Volume up/down buttons.
To save your settings, select STORE
and press theOK/Z
button. STORED
will be displayed. Press the Menu
button to go back to the previous
menu.
You can change the picture type
whilst watching the TV using the
picture Smart control.
Press the picture Smart control to
page through the different picture
types and select the one you want.
Once you have switched the TV off
the picture type will revert to the
stored setting.
Features Menu (Pink button)
Language
There are many languages available for the On
Screen Displays (OSD).
Press the OK/Z button to select the
language list.
Press the Program down button to
page through all the languages and
OK/Z to select.
PIP PROGRAM
LANGUAGE
TIMER
TILT
FEATURES
Timer:
Use Program up and down
buttons to select Timer in the features
menu. Using the Timer fuction, you can
switch to a specific programme at a pre-
programmed time or you can turn your TV
off at the time you want your TV to be
turned off.
Press OK/Z to access the Timer menu.
Clock:
Use the numeric buttons to set the
real time.
On Time:
Use the numeric buttons to set
the time that you want your TV to be turned
on (TV should be on stand-by mode).
Off Time:
Use the numeric buttons to set
the time that you want your TV to be turned
off (Stand-by mode).
Program No:
Use the numeric buttons to
set the programme number that will be
shown when you set the On Time.
P18
Tilt (OPTIONAL):
Because of the structure of the picture tubes,
your picture can be lost on the corners of the
screen depending on the position of your TV,
north-south-east-west.
To clear this effect, you can adjust the TILT
setting and prevent the picture loss
(OPTIONAL).
IMPORTANT NOTE:
Your TV has Digital
Comb Filter, DLTI (Digital Luminance
Transient Improvement) features to improve
picture quality. These features are set ON
and they can not be changed by the end user.
PIP Program:
You can select the
program to be displayed on the
PIP sub-picture by pressing
Volume up and down buttons or
you can also press the numeric
buttons to select the PIP program
directly. To select AV input press
the AV button repetively.
BACK
0..9 AV
CLOCK
ON TIME
OFF TIME
PROGRAM No
TIMER
--:--
--:--
--:--
P1
BACK
OK/Z
P-
MENU
AV
OK/Z
OK/Z