Filter
Top Products
29
TO REMOVE A CI CARD
When removing the CI card, make sure you pull out the Cam complete with the card
fitted.
This function enables you to watch the scrambled services (pay services) in some
channels. If you remove the CI Module, you can only watch the available non
scrambled digital programmes.
2- Press the Standby button on the remote to turn on the TV.
3- Press the INPUT button on the remote to display the Source List. Use the Up/
Down buttons to select DTV, and press the OK button.
4- If the CI card is inserted properly, the CI MODULE will briefly be displayed on
screen, The contents are dependent on the CAM provider in you country.
9.8- How To Connect CI (Common Interface) Card
1- To wiew the scrambled (pay) services in digital TV mode.
TO INSERT A CI CARD
(NOTE: The card on its own cannot be used on this tv. A cam must be purchased
and a the card is inserted into the cam. The cam / card holder is then inserted into
the ci slot on the tv.)
Insert the Cam / card holder card into the slot in the direction of the arrow until it
fully located.
Side or Rear view of TV