Filter
Top Products
2
1. Plug one end of cable to the BNC socket of master unit
and the other end to the BNC terminator included with
the F4F315-T.
2. Push the Power button to the ON position on the master
unit. If the BNC LED illuminates, the cable is bad.
3. If the cable passes step 2, then push the BNC test button
on the side of the master unit. The BNC LED will
illuminate green if the cable is good. If it illuminates red,
the cable is bad.
To Test Coax Cable (BNC)
Pair Configurations For Cables
with Modular Connectors
P73240_F5F315-T_US_man.qxd 9/24/03 3:21 PM Page 2