Filter
Top Products
40
Menus
English
Advanced Setup menu
FUNCTION (default
setting / value)
DESCRIPTION
Lamp Settings
• Lamp Power (Normal): Press eLeft orfRight on the projector or remote
control to set Normal or Economic as the power type of your projection.
Using Eco mode reduces system noise and reduces power consumption by
20%. If this mode is activated, the light output will be reduced and result in
darker projected images.
Setting the projector in Economic mode extends the lamp timer
automatic shutdown feature. For more information on how the total lamp
hour is calculated, see "Calculation of lamp hour" on page 44 for details.
• Lamp Hours:
i.
Lamp Hours Nor.: Shows the total time of the lamp has been used in
normal mode.
ii. Lamp Hours Eco.: Shows the total time of the lamp has been used in
economic mode.
iii. Lamp Rest Rate: Shows the percentage of the rest lamp life.
• Reset Lamp Timer: Resets the lamp timer. This should only be done after
the lamp has been replaced. See "Replacing the lamp" on page 45 for details.
Pattern
Use the patterns when installing the projector, even if there is no input signal.
• Grid: Press ENTER to display the grid test pattern. It helps you adjust the
image size and the focus to ensure that the projected image is free of
distortion.
• Color Bar: Press ENTER to display the color bar test pattern. After making
color adjustments, you can display this test pattern to check that the colors
are to your liking.
Dust Filter
• Dust Filter Hours: Shows the total time of the filter has been used.
• Reset Dust Filter Timer: Reset the dust filter timer. This should only be
done after the filter has been replaced. See "To clean the filter:" on page 43
for details.
High Altitude
(Off)
This item is designed for those who use the projector in extreme environments, like
high temperature or high altitude. We recommend you select Ye s when your
environment is higher than 3200 feet, or is hotter than 40°C. See "Operating in a
high altitude environment" on page 33 for details.
Password
• Password (Off): Limits use of the projector to only those who know the
correct password. When the function is activated for the first time, you have
to set a password for it. See "Setting a password" on page 24 for details.
Once the password is set and this function is selected, the projector is
password-protected. Users who do not know the correct password can not
use the projector. The password can be entered by using either the buttons
on the projector or the remote control.
• Change Password: You will be asked to enter the current password before
changing to a new one. See "Changing the password" on page 25 for details.
Key Lock (Off)
Disables or enables all panel key functions except POWER on the projector and
buttons on the remote control. To release key lock, press and hold EXIT on the
control panel or remote control for 5 seconds.
Source Block
Sets whether one or more than one source to be skipped or searched when the
projector is detecting input signals. See "Speeding up the process of source search"
on page 26 for details.