Filter
Top Products
Page 11
724-746-5500 | blackbox.com
Chapter 3: Installation
3. Installation
Follow these steps to install the converter:
1. Connect the power adapter to the converter.
2. Link the monitor plug to the converter.
3. Attach one end of the VGA cable to the VGA in port on the converter, and
connect the other end of the VGA cable to the PC display.
4. Connect the component (YPbPr output end) to other machines with the
component input end.
5. Attach the Video out (Composite video output end) to other machines with the
video input end.
6. Link the S-Video out (S-Video output end) to the PC signal output and connect
other devices with the S-Video input end.
7. Connect the Line in (stereo cable input end) with the stereo audio cable to the
PC sound card.
8. Connect the Audio out (stereo audio cable input end) to the external speakers
(if available) to output sound.
9. Attach the Audio L and R (audio output end) to the external speakers (if
available) to output sound. An amplified speaker is required.
10. Turn on the PC and TV.