Filter
Top Products
18
2- AND 4-PORT SERVSWITCH DT PRO II
Table 4-1. Hotkey commands.
Command Command/Description
<Left-Ctrl><Left-Ctrl> x Select PC channel. Select active PC
channel.(x is a top-row number key)
x=1–2 or 1–4 for PC channel number
<Left-Ctrl><Left-Ctrl> (Fx) Select hub port control. Select the
specific PC + USB hub port control—
works only if PC port/hub port control
binding is enabled.
Fx=F1–F2 or F1–F4 (Fx is a function
key); x=1–2 or 1–4 for PC channel
number
<Left-Ctrl><Left-Ctrl> (Fy) Select audio + microphone channel.
Select the active audio and microphone
channel. (Joint-select PC/hub port
control/audio and microphone, if binding
is enabled.)
Fy=F5–F6 or F5–F8 (Fy is a function
key); y=1–2 or 1–4 for audio/
microphone channel number
<Left-Ctrl><Left-Ctrl> + Z Bind PC and hub port control
switching. Enable the binding of PC
port and hub port control switching.
(Once this feature is enabled, any PC
and/or hub port control switching is
bound together.) (factory default)
<Left-Ctrl><Left-Ctrl> + X Unbind PC and hub port control
switching. Disable the binding of PC
port and hub port control switching.