Filter
Top Products
724-746-5500 | blackbox.com
Page 6
Preface/Safety Symbols Used in This Manual
Preface
This manual is provided to prevent service personnel from committing an act that results in the risk of fire, electric shock, or injury
to persons. Only trained service personnel should receive, unpack, and assemble the ServShield Enclosure. In addition, only trained
service personnel should install equipment in enclosures.
Safety Symbols Used in this Manual
This manual provides general safety guidelines to be observed during installation, operation, and maintenance of the ServShield
enclosure.
WARNING: Failure to follow directions in the warning could result in injury to persons or loss of life.
CAUTION: Failure to follow directions in the caution could result in damage to equipment or storage data.
Safety Considerations
WARNING: Improper handling and use of the ServShield enclosure could result in equipment damage, serious injury, or possible
death.
Only trained service personnel should be used to remove the enclosure from the pallet. Also, be sure you have a sufficient number
of service personnel. Do not attempt to move enclosures by yourself.
Only UL
®
Listed ITE units should be installed inside the ServShield cabinet.
Be sure to read and follow all individual manufacturer equipment manuals for safety and installation instructions.
The ServShield Cabinet was not evaluated as a fire enclosure.
Proper spacing is required when installing electrical equipment to avoid electrical shock. Maintain minimum spacing between
the accessories and components and the computer enclosure assembly for safe operation of the equipment when installed
in accordance with the National Electric Code ANSI/NFPA 70-1999.
The ambient temperature operating range for the ServShield enclosure and accessories is +50 to +95° F (+10 to +35° C).
The non-operating temperature is -4 to +140° F (-20 to +60° C).