Filter
Top Products
Page 5
724-746-5500 | blackbox.com
SMM4-2U
Installation Instructions
Step 6: Cable arms: Attach the two cable management arms using three 1
1
⁄2"
clevis pins.
NOTE: You can install cable management on the opposite side.
(2) arms
(identical)
(3) clevis pins and cotter pins
(pins install from bottom)
Figure 5. Attaching the cable arms.
Step 7: Monitor attachment. See Figure 6.
Step 7A: Turn the monitor face down on a large flat surface.
Step 7B: Locate the four VESA mounting holes on the rear of the monitor.
Step 7C: Determine if spacers are required. Some monitors have a “recess” on
the rear of the monitor. Spacers are provided to fill this gap. See Table 1
for spacer length options.
Step 7D: Determine the screw length. Only use the metric M4 screws provided.
Screw length is determined by the spacers used. See Table 1.