16
Securing and installing
the TEV-501
Before using for the first time
➮ Open the lower storage
compartment of the TEV-501’s
case, and remove the cigarette
lighter adapter and the four straps.
➮ Close the lower storage
compartment.
➮ Remove the unit from its case.
➮ Thread the adapter cable through
the opening in the case.
➮ Connect the plug to the DC 12V
input of the TEV-501.
➮ Place the unit back into the case.
➮ Secure the TEV-501 using the
Velcro straps located inside the
case by threading the Velcro straps
through the eyelets on the side of
the unit.
SECURING AND INSTALLING THE TEV-501
DC 12V