Filter
Top Products
Video Recorder 430/451 Series Operating instructions | en 33
Bosch Security Systems Installation and Operation manual F.01U.168.054 | v2.0 | 2012.05
Full-screen
To view a full-screen shot of a camera:
– Press a camera key.
– A full-screen shot of the analog camera that was selected appears.
Sequence
To view a sequence of live camera pictures of several cameras:
1. Press the sequence key.
– A sequence of camera pictures appears, each for a pre-programmed dwell time.
2. Press the sequence key to stop sequencing.
– Zooming, pressing the quad key, or selecting a single camera also stops
sequencing.
Cameo assignment
Assigning cameras to cameos in a quad view:
1. The cameo with the yellow border is the selected cameo.
2. Use the arrow keys to select a cameo.
3. Press the enter key to display the Cameo Menu.
4. Use the arrow keys to select a camera to put in the cameo and press the enter key.
5. Alternatively, right click a cameo with the mouse and choose a video input from the
Cameo Menu.
This cameo assignment is used in playback mode as well as in live mode.
Freeze image
Freezing a camera shot on monitor A:
1. Press the pause key to freeze the picture in the active cameo.
2. Press the stop key to return to live viewing.
3. Alternatively, right click and select Freeze or Unfreeze from the context menu using the
mouse.
If viewing a camera picture in full-screen mode, then this picture is frozen. The zoom function
can be used on a frozen picture.
Zoom
To zoom in on a video image:
1. Press the zoom key.
– The picture is enlarged by a factor of 2.
2. Use the arrow keys to select the area of the picture to be displayed.
3. Press the zoom key again to return to a full picture and leave the zoom mode.
Alternatively, right click and select Zoom or Exit zoom to enable or disable zoom mode with
the mouse. While in zoom mode, click on an area of the screen to zoom in on.