Filter
Top Products
ne | snoitcurtsni gnitarepO seireS 084/044 redroceR oediV latigiD 7
smetsyS ytiruceS hcsoB 50.1102 | 0.1v | 5060Q-81MA
Viewing pictures
The unit has two monitor outputs, A and B. The way in which these monitors display pictures
depends on how the system is configured.
Monitor A
Monitor A is the main monitor. It shows full-screen, quad or multiscreen live or playback
camera pictures. Status messages, alarms, motion, and video loss warnings are also displayed
on this monitor. When the menu system is activated, it is displayed on this monitor. Monitor A
is the default monitor for keyboard and mouse commands.
Changing the full-screen display on Monitor A
To control the display on monitor A with mouse control:
1. Display the System Control Bar.
2. Click .
3. From the pop-up menu, select the display for Monitor A
– Select 1-4/8 for the corresponding Camera
– Select the sequence key to sequence channels 1-4/8
Changing the quad/3x3 display on Monitor A
To control the quad/3x3 display on monitor A with mouse control:
1. Display the System Co
ntrol Bar.
2. Click .
3. From the pop-up menu, select the display for Monitor A
– Select the quad key to select the quad mode
– Select the multiscreen key to select the 3x3 mode (DVR 480 only)
– Select the sequence key to sequence the quad mode
Monitor B
Monitor B displays full-screen, quad or multiscreen (with or without sequence) of live
pictures. When an alarm or motion input is detected, the camera picture with the Alarm/
Motion indicator can be displayed on monitor B. When multiple alarms or motion occur,
camera pictures are sequenced on monitor B.
Changing the full-screen display on Monitor B
To control the display on monitor B with mouse control:
1. Bring up the System Control Bar.
2. Click the Monitor B button.
3. From the pop-up menu, select the display for Monitor B
– Select 1-8/16 for the corresponding Camera
– Select the sequence key to sequence channels 1-8/16
Changing the quad display on Monitor B
To control the quad display on monitor B with mouse control:
1. Bring up the System Control Bar.
2. Click the Monitor B button.
pOlaunam nsoitare