Filter
Top Products
Bosch Security Systems | Version 1.1
DVR4C | Installation Manual | Menu system EN | 20
>> MISCELLANEOUS
The DVR firmware version is shown here. Select Factory
defaults to set all parameters, except IP address, subnet
mask, default gateway and disk setup, to their default
values.
>>> SAVE SETTINGS
• Select Save Settings to save the current settings to a
USB memory stick.
>>> LOAD SETTINGS
• Select Load Settings to load previously saved
settings from a USB memory stick into the DVR.
>>> UPDATE FIRMWARE
• For authorized personnel only!
Select Update Firmware to load new firmware from a
USB memory stick into the DVR. The new firmware
overwrites the current firmware.
4.7 Profiles >
The recording schedule is divided by weekday day,
weekday night, weekend day and weekend night. Users can
configure start and end time of each schedule.
>> PROFILES
>>> CURRENT PROFILE
• Shows the profile (Weekday - Day, Weekday - Night,
Weekend - Day, Weekend - Night) that is currently
active.
>>> WEEK START AND WEEK END
• Any day from Monday to Sunday can be used as a
start date or end date of a week.
>>> DAY START AND DAY END
• Any time from 00:00 to 23:59 can be used as a start
time or end time of a day.
• If the begin time is later than the end time, then the
profile is active from the end time until the begin
time on the next day.
>> EXCEPTION DAYS
Exception days can be set, apart from the four standard
periods, e.g. Christmas. Start time and date, and duration of
the Exception days can be configured.
• Up to 30 exception days can be set that override the
calendar list.
• Use the up/down keys to move to an exception entry and
press the select key to start editing.