Filter
Top Products
Product
Document type
Release #
SAP/Doc number
DVR 600 Series
Release notes
V2.0.7
Video Recorder 600 Series new firmware version
www.BoschSecurity.com
Security Systems
Release date
2013.02.12
Page 1 of 6
1 DVR 600 Series firmware version 2.0.7 (date 2013-02-08)
File name: 600series.bin (2013-02-08)
This release includes the following improvement:
• Removed some wanIP providers that are not available anymore to solve issues with
some DynDNS providers
• Corrected web site for DDNS server ‘sitelutions’.
• Solved issue that sometimes after several connection losses the system does not allow
to reconnect again until power cycling the DVR.
• Security update for mobile devices.
Bosch strongly recommends upgrading to the latest firmware to
achieve the best possible functionality, compatibility and
performance.
2 Update procedure
To update the DVR 600 Series to the latest firmware, please refer to the Video recorder 600
Series Operation Manual, chapter 6.6.5 or follow instructions below:
1. Put firmware v2.0.7 via a PC on the root of a USB memory stick (file name: 600series.bin
[date 2013-02-08])
2. Insert the USB stick into the front USB connector of the DVR
3. Log on as “ADMINISTRATOR” in the local unit
4. Select Menu and go to the “System > Configuration” screen
5. Select Update firmware to upgrade the DVR software. In this case, the current DVR
settings and video will not be deleted or replaced during the update process.
Figure: Update firmware menu