Filter
Top Products
Product
Document type
Release #
SAP/Doc number
DVR 600 Series
Release notes
V2.0.7
Security Systems
Release date
2013.02.12
Page 5 of 6
3.9 Version 2.0.6
File name: 600series.bin (2012-10-12)
This release includes the following improvement:
• In this version unsigned hard disk drives are supported.
The below drives are released and recommended for use in the DVR630/650. These are
available from Bosch Security Systems as DVR-XSxx0-A Storage Expansion Kits.
We do not test other drives than indicated above to verify reliability:
• When using non-Bosch drives in DVR630/650 Series recorders, Bosch can no
longer be held liable for any loss or damages or system mal-function resulting
from the use of non-Bosch drives.
• Bosch will provide advance exchange and carry in service only on Bosch
products. This means that failing DVR630/650 Series recorders should be
returned for repair without non-Bosch drives.
• Should non-Bosch hard disk drives be returned, then Bosch will not be held
responsible for loss of these drives or any information recorded on these drives
or for any consequential damages.
• Bosch will not be held liable for loss or consequential damages resulting from
disclosure of any information stored on these non-Bosch drives.
• Remote export on low bandwidth networks are supported in this version.
Note 1
Issue: Web access log-on as “Normal user” that has rights for playback. Still the playback icon
is grayed out and cannot be pressed.
Solution: You can select additional rights for Play, Search, Export and Alarm acknowledge for a
“Normal user”. However to give additional ‘Play’ rights you also have to give additional ‘Search’
rights. You cannot have ‘Play’ rights without also having ‘Search’ rights activated.
Note 2
Issue: Uploading DVR 400/600 firmware via webpage using IE, can cause unexpected error
message "DVR update file contains errors" as result of IE security settings.
Solution: Enable "Include local directory path when uploading files to a server".
In IE9 this setting can be found in "tools", "Internet options", "Security", "Custom level",
"Miscellaneous", "Include local directory path when uploading files to a server". Enable this
setting to make uploading DVR400/600 firmware possible.