Filter
Top Products
34 en | Operating instructions Digital Video Recorder 440/480 Series
AM18-Q0605 | v2.0 | 2012.04 Installation and Operation manual Bosch Security Systems
3. From the pop-up menu, select the display for Monitor B
– Select the quad key to select the quad mode
– Select the sequence key to sequence the quad mode
5.4.3 Viewing
The tables show all possible views for monitor A. The set of muti-screen views available
depends on the resolution (aspect ratio) setting and the model type (4 or 8 channels).
Table 5.2 Multi-screen viewing in 4:3 and 5:4
Quad screen
To view quad displays:
– Press the quad key.
– A quad display of camera pictures appears on the active monitor.
Full-screen
To view a full-screen shot of a camera:
– Press a camera key.
– A full-screen shot of the camera that was selected appears.
Multi-screen
To view multi-screen displays on monitor A:
– Press the multi-screen key.
– A multi-screen display of camera pictures appears on the active monitor.
Sequence
To view a sequence of live camera pictures of several cameras:
1. Press the sequence key.
– A sequence of camera pictures appears, each for a pre-programmed dwell time.
2. Press the sequence key to stop sequencing.
Cameo assignment
The cameo assignment is used in playback mode as well as in live mode.
Assigning cameras to cameos in a quad or multi-screen view:
1. Use the arrow keys to select a cameo.
– The cameo with the yellow border is the selected cameo.
2. Press the enter key to display the Cameo Menu.
Resolution (aspect ratio) 800x600 (4:3), 1024x768 (4:3), 1280x1024 (5:4)
Full screen
Quad
3x3 (not for 4-channel model)