Filter
Top Products
Table of Contents
1 DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2 UNPACKING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
3 SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
4POWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
5 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
5.1 Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
5.2 Power Supply Connections . . . . . . . . . . . . . . . . . . . .8
5.3 Data Input Connections . . . . . . . . . . . . . . . . . . . . . .8
5.4 PC RS-232 Interface Using a 9-Pin Connector . . . .8
5.5 RS-232 Interface Using RJ-11 Connector . . . . . . . .8
5.6 Remote RS-232 Device Interface . . . . . . . . . . . . . . .8
5.7 Data Output Connection . . . . . . . . . . . . . . . . . . . . .9
5.8 AutoDome Camera or Receiver/ Driver
Site Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . .9
6OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
7 TYPICAL CONFIGURATIONS . . . . . . . . . . . . . . . . . . . .10
8PIN OUTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
9 DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
1DESCRIPTION
The LTC 8786 Series of data converters are designed to
convert Bosch "Receiver/driver and AutoDome RS-232
Control Code Protocol" into Allegiant biphase control code.
These units are specifically designed to transform the single
data output from a DÉSA DVR (or a similar device) into
multiple control code outputs for operating AutoDome
cameras.
The Bosch "Receiver/driver and AutoDome RS-232 Control
Code Protocol" is a simplex RS-232 data format designed
to communicate with the Bosch line of receiver/drivers,
AutoDome cameras, LTC 8786 converters, and other
compatible accessory devices. Complete information on the
protocol can be obtained by downloading the manual from
the AutoDome section of www.boschsecurity.com.
The input RS-232 baud rate of the LTC 8786 Series is fixed
at 9600 baud, 1 stop bit, 8 data bits, no parity, and no
handshake.
The LTC 8786 Series units can be connected directly to the
RS-232 serial port of a PC using an industry standard null
modem cable. If another connection type is required, an
interface cable can easily be constructed using the supplied
9-Pin D connector.
The supplied power supply provides power to the LTC 8786
Series unit.
2UNPACKING
This electromechanical equipment should be unpacked and
handled carefully:
■
LTC 8786/50 or LTC 8786/60 Data Converter unit.
■
Power supply adapter.
■
1.8m (5.75) power supply cable with bayonette plug.
■
Subminiature 9-Pin D connector.
■
Four (4) adhesive backed rubber feet.
If an item appears to have been damaged in shipment, replace
properly into the carton and notify the shipper. If any items
are missing, notify your Bosch Security Systems Sales
Representative or Customer Service Representative. The
shipping carton is the safest container in which the unit may
be transported. Save it for possible future use.
3SERVICE
If the unit ever needs repair service, the customer should
contact the nearest Bosch Security Systems Service Center for
authorization to return and shipping instructions.
Service Centers
U.S.A.: Phone: 800-366-2283 or 408-956-3895
fax: 800-366-1329 or 408-956-3896
e-mail: NationalServiceCenter@ca.slr.com
Canada: 514-738-2434
Europe, Middle East & Asia Pacific Region:
32-1-440-0711
For additional information,
see www.boschsecuritysystems.com.
4 Power
Model Rated Voltage Voltage Range Power*
LTC 8786/60 120 VAC, 50/60 Hz 105 to 132 VAC 3 W
LTC 8786/50 220-240 VAC, 195.5 to 253 VAC 3 W
50/60 Hz
* At rated voltage.
Introduction
EN
© 2003 Bosch Security Systems Page 7 of 12