AM193147_03_V.pdf December 20, 2001 19
Operating Your Lifestyle
®
30 System
Turning the system on and choosing the CD player
Press the CD key on the remote or press SOURCE SELECT on the music center until CD is
selected. If the system is already on, use one of these keys to select the CD player. The CD
indicator on the display lights. If a CD has been loaded, it begins to play.
Note:
Selecting CD turns the system on in STEREO (2-speaker) mode. Press SURROUND
(5-speaker) or STEREO+CENTER (3-speaker) to change the mode.
CD operations
If you want to Press
Play or resume play of a CD PLAY, or
/
II
PLAY/PAUSE
Pause a CD PAUSE, or
/
II
PLAY/PAUSE
Stop a CD ■ STOP, or select another source
Go to next track SKIP (forward)
Go to beginning of current track SKIP (reverse) after 4 seconds of track play
Go to previous track SKIP within the first four seconds of the track
After four seconds, press SKIP twice to go to the
previous track. In RANDOM mode, skips to previous
track played.
Play another disc NEXT DISC
In PLAY mode, selects discs in order, 1 through 6,
then back to 1; in RANDOM mode, randomly selects
another disc. The music center skips empty disc slots.
Scan a CD Press and hold SKIP or , or TUNE or
Randomly play tracks on all discs RANDOM, or SKIP plus (on the music center)
Randomly play tracks on one disc RANDOM, or SKIP plus (on the music center),
a second time
Cancel random play RANDOM, or SKIP plus (on the music center),
a third time; press ■ STOP; or select another source
Note:
To prevent excessive wear on the CD mechanism, unattended CD play or random
play operations change to STOP after 24 hours. If you want to leave the music center
playing unattended for longer than 24 hours, you can use the radio.
The music center display provides the following information about the CD changer functions
(see sample display in Figure 26):
• Which CD is playing, paused, or stopped, or NONE if no disc is installed
• How much time the current CD has played
• Which track is playing
• If RANDOM ALL DISCS or RANDOM (one disc) is selected
• Which slots have been scanned and have discs loaded
-
Numbers in boxes represent discs in slots.
-
Empty boxes indicate disc slots that have not yet been scanned by the music center.
-
Blank spaces indicate empty slots (or discs that cannot be loaded).
-
A flashing box indicates the disc is upside down or cannot be read.
Figure 26
Display of CD playing in zone 1:
Disc 3, track 8, 2 minutes and 45
seconds played, 6 CDs are
loaded, and random play for all
discs is selected