Filter
Top Products
11
USING MULTI-ROOM AUDIO
TAB 5TAB 4TAB 6TAB 8TAB 7English TAB 3TAB 2
4. Using a fine-point pen or other small tool, set
switches 1-4 to the corresponding up and down
positions shown for that house code.
5. Slide the battery cover back into place until it
snaps closed.
6. Go to the main room and press the Setup button
on the control console.
7. Select Homewide.
8. Select the Standard house code mode.
9. Return to the expansion room and press the
Stop button ( ) on the RC-35S2 remote.
The house code in your LIFESTYLE
®
system is now the
same as in the RC-35S2 remote control.
RC35S2_OG.book Page 11 Friday, March 26, 2010 12:17 PM