Filter
Top Products
10 – English
CONTROLS AND INDICATORS
Information display (235/135 and V35/V25 systems only)
The display provides operating and system status information.
Examples:
Remote glow button
Pressing the glow button on the rear of the remote illuminates the remote
buttons (and the display for 235/135 and V35/V25 systems). The light turns off
automatically after several seconds to prolong battery life.
Cable
Source identification Volume
Radio tuner iPod
Operating prompt
Cable
43
FM P1
90.9 - WBUR90.9
iPod
Album
Hold number key
to set preset
Glow button
To adjust the illumination level:
Note: If the currently selected source is AM or FM, switch
to any other source before making this adjustment. This
prevents unintentionally deleting a radio preset.
1. Press and hold the Glow and OK buttons at the
same time for 5 seconds.
2. Press the up/down navigation button to select
Brightness or Contrast.
3. Press the left/right navigation button to decrease
or increase the illumination level.
4. Press either the OK or Glow button to return to
normal operation.
Hershey+OpG.book Page 10 Thursday, March 31, 2011 12:21 PM