Filter
Top Products
INSTALLATION of DOORS
1. Remove hinges and screws from hardware
bag. Mount hinge unit on door as shown in
Fig. 6 and Fig. 7 securing with screws
provided.
2. Install the door by inserting door side of the
hinge into the bracket on the body as shown;
A) 125 degree hinge
Insert door side of clip hinge as shown
in Fig. 8
B) 170 degree hinge
Insert door side of clip hinge as shown
in Fig. 9
3. Check door for proper alignment. If the door
needs to be adjusted please refer to the
adjustment procedures in Fig. 10 and
Fig. 11. Door edges should be aligned with
the edges of the body and should fit evenly
to the face of the body.
4. 125 degree hinge only: Snap on hinge
cover plate. (Fig. 12)
Fig. 11Fig. 10
Fig. 12
125 Degree Hinge
This screw for
up and down
adjustment
This screw
for depth
adjustment
This screw
for left and right
adjustment
170 Degree Hinge
This screw for
up and down
adjustments
This screw
for depth
adjustments
This screw
for left and right
adjustments
Hinge Cover
Fig. 6
Fig. 7
170 Degree Hinge
Mounted to Door
Fig. 8
Fig. 9
Hook bottom of
hinge into place
on the bracket
Press down
on hinge until it
clips in place
170 Degree Hinge
Mounted to Cabinet
125 Degree Hinge
mounted to Cabinet
Hook bottom of
hinge into place
on the bracket
Press down
on hinge until
it clips in place
125 Degree Hinge
Mounted to Door
2