Bush A6 Flat Panel Television User Manual


 
PREPARATION
IMPORTANT: Do not apply pressure to the
screen display area which may compromise
the integrity of the display. The manufacturer’s
warranty does not cover user abuse or
improper installations.
PREPARING YOUR LCD HDTV FOR
WALL MOUNTING
We suggest that you keep your TV at least 2.36
inches (60 mm) from the wall to prevent cable
interference.
Before mounting your TV on the wall, you need
to remove the base.
For your safety, please use listed wall mount
bracket with minimum weight of the TV
without stand. (Please see page.2 .)
To attach a wall mount bracket to your TV:
1 Loosen the screws holding your TV to
the stand and remove the stand base
from the TV.
2 Secure the wall mount bracket to the
back of your TV using four screws, as
indicated in the illustration.
For 26" model
200 mm
100 mm
M4 screws
6
For 32" model
200 mm
200 mm
For 42" model
NOTE
Wall mount bracket & screws are not
included.
Please make sure to connect the power plug
to the wall outlet socket after connecting the
TV to the power cord!
1. Install the base stand; place the TV
on a solid surface.
Ensure that the TV is placed in a position
to allow free flow of air. Do not cover the
ventilation openings on the back cover.
To prevent any unsafe situations, no naked
flame sources, such as lighted candles,
should be placed on or in the vicinity.
Avoid heat, direct sunlight and exposure
to rain or water. The equipment shall not
be exposed to dripping or splashing.
Min
1 m
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 01056