Filter
Top Products
BHAS01UR
9
b) If you ever want to change these buttons back to controlling the volume and
mute of your digital box, press both the
button and the button (at the same
time) and hold them down until the light under the
button flashes four times.
Your remote control will now work the volume and mute functions of your digital
box.
Programming using the search facility
Make sure that you are pointing the remote control at the TV and not your digital 1
box.
Press both the 2
button and the button (at the same time) until the button
flashes twice. Release the buttons.
Press and release 9, then 9 again, then 1. The button will flash twice.3
Press the 4
button and release it. The button will flash once.
Now press the 5 button, and release it. Each time you press the button, the
remote control is searching for the correct code. Soon your TV will turn off. When it
does turn off, press the
button to confirm this code.
Your remote control will remember this code even if you replace the batteries.6
Once you have programmed your remote control to switch your TV on and off you 7
can programme it to control your TV volume and mute functions by following step 7
shown under ‘Programming your learning remote control’ using the four digit code.