Filter
Top Products
70 Series DVD Player 20
Some televisions and monitors are equipped with component video
inputs and are capable of reproducing a progressively scanned video
signal. Connecting to these inputs allows you to view higher quality
pictures with less flicker.
DVD77 OOnly
If you find that you have no display but are getting sound from your
speakers, you have set the DVD player to progressive scan mode. Simply
press the I-Scan button on your remote control.
If your progressive scan TV has Y, Pb Pr video inputs you can use the
players Y, Cb/Pb, Cr/Pr outputs . Press the p-Scan button to switch the
p
l
ayer to the progressive scan video output mode.
If this player’s audio outputs are also connected to the TV, the L/R
channels of 2-CH OUT should be connected to the TV’s AUDIO IN
terminals.
It is imperative that you use high quality component video cables to
ensure the best possible performance.
Audio In
YY PPrr PPbb
Rear PPanel
Audio Cord
Note: TV set with progressive-scan
video input
CONNECTION TO A PROGRESSIVE SCAN TV/DISPLAY
70 SSeries