Canon RC-1 Universal Remote User Manual


 
To Replace the Battery
1. The remote control is powered by a three-volt CR2025 lithium battery which is included.
2. After sliding the latch in the direction shown, remove the battery holder.
3. Remove the battery from the battery holder.
4. Insert a fresh battery with the face marked "+" on top.
5. Slide the battery holder into the remote until the latch clicks into place.
Specifications
100% compatible with Canon RC-1/RC-6 infrared remote control.
Works with all remote shutter release control modes (Quick-response, W/T Zoom).
Easy-to-replace CR2025 lithium battery.
Operating temperature: 5°C to 40°C (40°F to 105°F).
Typical Battery Life: up to 3 years; 20,000 exposures.
Care and Storage
1. When the remote control is not in use for an extended period of time, please remove the battery
from the remote control.
2. Do not expose the remote control to excessive heat or humidity.
3. Do not leave the remote control on or near a television, refrigerator, or other appliance with a
magnetic field.
4. If the remote control gets wet, wipe it with a dry towel as soon as possible.
5. Do not use organic solvents, such as alcohol or paint thinner when cleaning the remote control.
ONE YEAR UNCONDITIONAL GUARANTEE
If for any reason, your ProMaster product fails within ONE YEAR of the date of purchase, return the product to
your ProMaster dealer and it will be exchanged for you at no charge. ProMaster products are guaranteed for
ONE FULL YEAR against defects in workmanship and materials. If at any time after one year, your ProMaster
product fails under normal use, we invite you to return it to ProMaster for evaluation and repair.
Code 7599
www.promaster.com
Fairfield, CT 06825
2