3. Camcorder: Touch [End] > [OK] when finished.
This concludes the procedure for using Wi-Fi to playback images and movies on a computer.
IMPORTANT
Observe the following precautions when transferring files. Failing to do so may interrupt the
transfer and incomplete files may remain at the transfer destination.
- Do not open the double memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
If the file transfer is interrupted, select [New files] and perform the file transfer again.
If incomplete files remain at the transfer destination, check the content and make sure they are
safe to delete before deleting them.
NOTE
Depending on the access points settings and capability, playback may take time to start or may
not appear smooth.
After the connection is established, you can touch [View Information] to view the access points
SSID, connection protocol, and the camcorders IP address and MAC address. You can also select
the access point to which the camcorder will connect.
The following types of MP4 scenes will be recognized as multiple files on other devices.
- Scenes exceeding 4 GB
- Scenes recorded at 35 Mbps exceeding 30 minutes
- Scenes recorded with a recording mode other than 35 Mbps exceeding 1 hour