Filter
Top Products
Hurricane™ 1300 User Manual 7 3/26/2009 3:18 PM
Hanging Clamp
Note!
Clamp is sold separately.
Angled Up
Angled Down
The fuse is located
inside this
compartment.
Remove using a flat
head screwdriver.
Fuse Replacement
With a flat head screwdriver wedge the fuse
holder out of its housing. Remove the damaged
fuse from its holder and replace with exact
same type fuse. Insert the fuse holder back in
its place and reconnect power.
Mounting
ORIENTATION
This fixture should only be mounted/used on a flat surface. This fixture may not be tilted.
RIGGING
It is important never to obstruct the vents pathways. Mount the fixture using, a suitable “C” or “O” type
clamp.
When selecting installation location, take into consideration the fluid reservoir access and routine
maintenance.
Safety cables must always be used, utilizing the provided safety eye bolt.
Never mount in places where the fixture will be exposed to rain, high humidity, extreme temperature
changes or restricted ventilation.
Disconnect the power cord before replacing a fuse and always
replace with the same type fuse.