Filter
Top Products
3 Cisco 6130 NI-2 DSLAM System Cables 78-10280-01 02/15/00
Cisco 6130 DSLAM with NI-2 User Guide3-4
Figure 3-2 DSLAM to POTS Splitter Chassis Cabling Diagram (1-to-1 Cables)
3.3 Required Cables for Installation without POTS Splitter
In an installation without a POTS splitter, use only designated cables to connect the Cisco 6130 NI-2
DSLAM and the CO facility MDF. The illustrations in this section show you how to connect
three-to-three cables.
Note Some chassis connectors in the cabling diagrams are not used because they are specific to a
different Cisco 6100 series NI-2 DSLAM system or because they are reserved for future use.
3.3.1 Using Three-to-Three Cables
To associate the CO facility MDF wire pairs and the DSLAM modem ports, the three-to-three cables
remap wire pairs from the Cisco 6130 NI-2 DSLAM Champ connectors to the CO facility MDF
Champ receptacles.
Cisco 6130
chassis
28842
P14
P17
P15
E2A
VISUAL AUDIBLE
FAN
ALARM
MIN
MAJ
CRIT
ACO
MIN
MAJ
CRIT
ACO
MIN
MAJ
CRIT
ANALOG TEST I/F
RING
TIP
P18
-48V_B
-48RTN
-48V_A
-48RTN
P13
MODEM
POOL
A
OUT
J48
J39
J42
MODEM
POOL
B
OUT
J46
J43
J44
J41
J40
J47
J49
P2
J1
Fan
tray
+
FAN
P2
J1
-48VA
RTN
-48VB
RTN
POTS
splitter
P1
P2
P3
P5
P4