Filter
Top Products
DVS9755z 27
10. SPECIFICATIONS
DVD player section
System: Digital Versatile Disc System with CDDA
Capable
Usable Discs: DVD Video Disc, Compact Disc
Frequency Response: 20 Hz to 20 kHz (± 1 dB)
Signal to Noise Ratio: 100 dB
Dynamic Range: 100 dB
Distortion: 0.01% THD
Channel Separation: 80 dB
Audio section
S/N: 100 dB (digital input)
100 dB (analog input)
Frequency characteristics: 20 Hz to 20 kHz
(±1 dB)
Separation: 90 dB (digital input)
80 dB (analog input)
High frequency distortion: 0.01% (digital input)
0.01% (analog input)
Analog output :4.0 Vrms (VOL Max)
Analog input :2.0 Vrms (Max)
Digital input :44.1 kHz sampling,
16-bit digital audio data
DSF : 6 modes
P.EQ : 3 bands x 2 (front/rear independent)
Fo; 20 Hz to 20 kHz
1/3 octave steps
Q; 1 to 20
G; ± 12 dB
Preset front; 6 types
Rear; 7 types
Subwoofer voltage gain; +12 dB
(M.VOL MAX)
LPF Fo; 50 Hz, 80 Hz, 120 Hz
LPF slope; 12, 18, 24 dB/oct
General
Source unit
Power Supply Voltage:
14.4 V DC (10.8 to 15.6 V allowable)
Ground:Negative
Current Consumption : Less than 3 A
Weight: 3.5lb. (1.6 kg)
Dimensions:
7” Width X 2” Hight X 6-5/8” Depth
(178 mmWidth X 50 mm Hight 165mm Depth)
Remote control unit
Weight: 1oz. (30 g) (including battery)
Dimensions:
1-7/8” Width X 5-9/16” Hight X 1-1/4” Depth
(47 mm Width X 142 mm Hight 32 mm Depth)
Note:
• Specifications and design are subject to change
without notice for further improvement.
List of accessories
1. DVD disc unit...............................................1
2. Control unit ..................................................1
3. Owner’s manual ..........................................1
4. Warranty ......................................................1
5. Control unit cord ..........................................1
6. Power supply harness .................................1
7. Parts bag (1)
• Set screws (M2.6 x 4).................................1
• Cord clamps (small)....................................1
• Double sided tape for securing brackets ...2
• Cord clamps (large) ................................... 3
• Cord holders .............................................. 2
• Velcro tape (large A) .................................. 2
• Velcro tape (small B) ..................................2
• Set screws (M5 wing nuts) .........................4
• Installation bolts (M5 x 6) ...........................4
• Double sided tape for securing the remote con-
trol holder....................................................1
• Installation bolts (M5 x 6 counter sunk) .... 4
8. Parts bag (2)
• Hook plate...................................................2
• Spring..........................................................2
• Rubber cap .................................................1
• Special screw............................................. 1
• Screw (M5 x 6) .......................................... 1
9. Bracket with bolt ..........................................2
10. Main unbracket ..........................................2
11. Batteries (type AAA) for remote control ....2
12. Remote control ..........................................1
13. Remote control holder...............................1
14. Installation .................................................1
15. Universal mounting bracket ......................1
16. Strap ..........................................................1
17. Outer escutcheon ......................................1