Filter
Top Products
INTRODUCTION
The Clarion VMA1041 is a full-featured 10.4" LCD Color Display Monitor. It
can be used as:
• A stand-alone TV when used with the optional TV Tuner, TTX001
• A monitor integrated into a mobile multimedia system using the auxiliary
A/V inputs
• A PC monitor with the VGAinput
ABOUT THE MANUAL AND WARRANTY
To start enjoying your new Clarion VMA1041, please read the instructions
listed in this manual. Keep all instructions for future reference. Please fill out
and send in the enclosed warranty card to protect your purchase and aid in
warranty service. Also, save your original sales receipt as proof of
purchase.
* If using the VMA1041 with the optional TV Tu n e r, please refer to the owner’s manual
for the TTX001.
TABLE OF CONTENTS
Precautions • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •1
Package Contents • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •2
Button Locations • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •2
Installation and Wiring • • • • • • • • • • • • • • • • • • • • • • • • • • • • •4
Picture Adjustment • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •4
Auxiliary Video Inputs • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •5
Optional Remote Control Battery Installation • • • • • • • • • • • • • • •5
Optional Remote Control Operation • • • • • • • • • • • • • • • • • • • • •6
Optional TTX001 TV Tuner Installation • • • • • • • • • • • • • • • • • • •6
TV Tuning • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •7
Care and Maintenance • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •7
Troubleshooting • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •7
Product Specs • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •8
Notes • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •9
PRECAUTIONS
•
This set is for use in 12V, negative ground vehicles. Be sure to consult your
store of purchase before installing it on 24V vehicles.
•
Do not operate the set in ways other than described in this guide. Doing so
may damage it.
•
SAFETY FIRST! For rear seat use only. Do not install on dashboard or
anywhere else that would permit monitor to be viewed by the driver.
Monitor must not be located in the motor vehicle at any point forward of the
back of the front seats. Monitor must never be used in any manner that will
distract driver or interfere with driver’s safe operation of the motor vehicle.
•
Be careful not to run down the car battery while using the set with the car
stopped.
1