Filter
Top Products
DIGITAL VIDEO RECORDER MANUAL
DIGITAL VIDEO RECODER MANUAL
3
Warning
Check if the power is switched off before installation.
Don’t plug in at the same time. Otherwise it may be
set on fire or put you at the risk of electrocution or
damage.
Check if the power is switched off before installation
or additional repair. Never plug in while the device is
in operation. Otherwise it might be set on fire or put
you at the risk of fire, electrocution and damage.
Keep the cables at least 15 centimeters away from
the wall and at least five centimeters away from the
side so that the cables, including power line and
video cable, may not be disfigured. Otherwise it
might put you at the risk of fire, electrocution and
damage.
Never uplift the cover, break down, repair and
maintain at your disposal. Otherwise it might put
you at the risk of fire, electrocution and damage.
.
Keep the device environment always clean before
and after installation of the device. Use dry cloth to
clean the device. Never use any organic solvent.
Otherwise it might be the cause of electrocution or
mechanic disorder.
Input voltage of the device should come within the
range of 10 percent of specified voltage. Use
separate wall power to keep heating appliances,
including hair dryer, iron and refrigerator. Otherwise
it might be the cause of fire and electrocution.
When strange noise or smell is sensed, immediately
plug out and send inquiry to service center or seller.
Do not install device in humid place filled with dust.
It might be the cause of electrocution and fire.