Filter
Top Products
9011 Owner’s Manual •
••
• (V 1.0) Page 17 of 22
Technical Specifications
Table 4. Card - Technical Specifications
Category Parameter Specification
Data Rates Supported SMPTE 259M-C SD-SDI: 270 Mbps
Frame Rates Supported 486i 29.97 NTSC, 575i 25 PAL
Impedance
75Ω terminating
Equalization 1000ft (300 meters) Belden 1694A
Serial Digital
Video Input
Return Loss >18dB at 5MHz – 270MHz
Number of Outputs
4
Video Outputs
Composite, Component YPbPr (BetaCam™, MII™,
SMPTE/N10), RGB, and Y/C
Conversion Bit Depth
10-Bits
Frequency Response
4x Y: 0-5.5 MHz +/- 0.15 dB
4x PbPr: 0-2.2 MHz +/-0.25 dB
Differential Phase
< ±0.5° typical
Differential Gain
< ±0.5% typical
S/N
> 75 dB
Conversion Time
< 2 us
K-Factor 2T
< 0.6%
SCH Phase
< 0.8%
Analog Video
Output
Return Loss
> 35dB to 5 MHz
Number of Inputs
1 Terminating Frame Reference Inputs
1 Terminating Reference on BNC 2
Standards Supported
486i 29.97 NTSC, 575i 25 PAL
Signal Level
1Vp-p nominal
Signal
Analog video sync (black burst or tri-level)
Impedance
75Ω
Return Loss
> 30dB to 30MHz
Reference
Video Input
Max DC on Ref Input
±1V
Total Power Consumption < 7W
Other
Warranty Five Year Transferable
Specifications are subject to change without notice.