COBY electronic TF-DVD7380 DVD Player User Manual


 
14
Using the Battery Pack (DC)
The rechargeable battery pack can be used for approximately 300 charge-cycles without any
noticeable change in performance.
Important: The battery should be charged fully (minimum 4 hours) before its
initial use to ensure optimum lifetime performance.
To install the battery pack:
Match and insert the Retention Clips on the battery pack to the Retention Slots on the
bottom of the player.
Press and slide the battery pack down and into place (the retention clips will click).
To release the battery, press the “Battery Release” button and slide the battery pack up and out.
To charge the battery pack:
Connect the AC power adapter to the
battery charge jack located on the
battery pack. Please note that the
battery charge jack is NOT the same
as the DC Power In Jack located on
the right side of the player.
The Battery Charge indicator will
light red while it is charging; it will
light green when the battery is fully
charged.
Note:
When the battery charge level is low, the unit will enter STANDBY mode automatically.
It is not necessary to install the battery to charge it (i.e., the battery may be charged separately).
1.
2.
3.
1.
2.
GETTING STARTED