Filter
Top Products
The Compustar system will allow up to three remotes to be programmed to one
vehicle. Please perform the following procedure to add or reprogram additional
remotes.
Step1 : Activate Valet/Programming mode by manually turning the ignition on
and off five times
(between Acc and On)
with car key within a 7 second period.
The parking lights will flash once with successful
completion of this step.
Step2 : Within a 7 second period after cycling the ignition for the 5
th
time,
press the button . The car parking lights will flash once to confirm that the
transmitter has been programmed. Continue program the additional remotes.
The parking lights will flash two times when the programming mode is expired.
You can arm by pressing the button for a 1/2 second.
You can disarm by pressing the button for a 1/2 second.
Press buttons for a 1/2second to make your car siren mute when
arming or disarming your vehicle. Keep in mind that your car siren will still
activate for all other modes (i.e. panic, alarm, shock sensor) regardless of
whether or not your car siren is in mute mode. The car siren will be mute only
when arming or disarming your vehicle. In alarm mode, the
starter kill
function
(this maybe an optional feature provided by your installer) is
activated. This feature disengages the starter mechanism on your car that
prevents you from starting your car even with a manual key when
your vehicle
s alarm mode is activated.
6
Alarm Mode
Remote-Pager Learn Routine
( + )
5
It a button is pressed, the LED Icon will be flashed rapidly. Also, if the signal
was sent successfully, the remote will beep and the LED icon will flash.
If the signal fails, the remote will beep rapidly.
Query( + 2 Sec) : When This function is activated, if any of the
doors are still open, the Icon will be shown on the remote transmitter
Query( + 2 Sec) : If the engine is still running, icon will be
shown on the remote.
Remote-Pager LED Functions
Theft
Paging Operation
DISPLAY
LED ICON
Door
Trunk
Hood
Shock
Sensor
Storng
Weak
R.P.S
AUTO Arm/Disarm
ICON
Explanation
door,trunk.or hood,are open.
Indicates that the second stage shock sensor has been triggered
Indicates that the first stage shock sensor has been triggered
Indicates if your vehicle has auto- started properly or ignition on