Crestron electronic CNRFGWA-418 Universal Remote User Manual


 
ISYS I/O WIFI & HANDHELD REMOTES
Handheld Remote Accessories
www.crestron.com | 800.237.2041 | 201.767.3400
© 2007 Specifications subject to change without notice
wifi & handheld remotes
IR GATEWAYS
C2N-IRGW-1G IR Gateway, Wall Mount
The C2N-IRGW-1G IR Gateway is a 1-way infrared
receiver for Crestron IR wireless handheld remotes
and touchpanels. It is also compatible with any third-
party IR remote utilizing the RC5 command set.
The C2N-IRGW-1G is designed to fit in a 1-gang
electrical box using a Decora
®
style faceplate (not
included). Its entire visible face consists of a smoked
plastic lens providing a neutral appearance suitable
for use with any color scheme. The C2N-IRGW-1G
is a Cresnet device compatible with any 2-Series
control system.
SPECIFICATIONS
IR Wireless
IR Frequency 36 to 38 kHz IR
Formats: Crestron format, RC5
Range: Up to 50 ft line of sight (typical), dependent upon
angle, obstructions, IR interference, and IR remote signal
strength
Connectors
NET: 4-pin 3.5mm detachable terminal block
Cresnet slave port, connects to Cresnet control network
LED Indicators
(1 red) Indicates IR signal reception, Cresnet network
communication, and setup/update functions
Controls
(1) Recessed miniature pushbutton for setup
Power Requirements
Cresnet Power Usage: 1 Watt (0.042 Amps @
24 Volts DC)
Environmental
Temperature: 41° to 104°F (5° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Enclosure
Injection-molded plastic with smoked plastic face, 1-gang
mountable in an electrical box using Decora
®
faceplate
(not included)
Dimensions (Without Faceplate)
Height: 4.13 in (10.48 cm)
Width: 1.75 in (4.45 cm)
Depth: 1.37 in (3.45 cm)
Weight
2.4 oz (68.0 g)
149