Filter
Top Products
DVD PLAYER
REFERENCE
16
MENU
SUBMENU OPTIONS DESCRIPTION
SCREEN
TV Type
4:3 PS
4:3 LB
16:9
Screen Saver
On
Off
TV System
NTSC
PAL
AUTO
Video output
CVBS+S-Video
Brightness
Normal
Bright
Soft
Contrast
-3
-2
-1
0
+1
+2
+3
+4
CUSTOM
Parental Ctrl
1
2
3
4
5
6
7
8
Off
Password
Old
New
Verify
Angle Mark
On
Off
Default
Read
Set TV screen at 4:3 Pan Scan
Set TV at screen 4:3 Letter Box
Set TV at screen 16:9
Output signal as NTSC
Output signal as PAL
Output signal as per default of disc
CVBS+S-Video output
No one under 8 admitted
Input number by users to change password,
default setting:8888
Select normal, bright, or soft to personal
preference.
Select various levels to adjust the contrast
according to personal preference.
Set screen saver to ON or OFF.
Set the Angle mark to ON or OFF
Return to factory setup
Style
Style 1
Style 2
Style 3
Style 4
Down mix
Audio Setup
Lo/Ro
Lt/Rt
Handling Precautions
Maintenance
Hold the disc by the edge so the surface will not be soiled with fingerprints. Fingerprints, dirt and
scratches can cause skipping and distortion. Do not use record cleaning sprays, benzene, thinner.
Static electricity prevention liquids or any other solvent. Be careful not to drop or bend the disc. Do not
try to close the disc tray when disc is not installed properly. Be sure to store the disc in its exclusive
case when not in use.
Handling
Wipe gently with a soft, damp (water only) cloth. Move the cloth from the centre hole towards the outer
edge. lmproper disc disc storage: Discs may be damaged if they are stored in the following places: Areas
exposed to direct sunlight; Humid or dusty areas; Areas directly exposed to a heat outlet or heating
appliance.
Player Maintenance
Be sure to turn the unit off and disconnect the AC power cord before maintaining the unit. Keep the unit
clean. If the surfaces are extremely dirty, wipe the unit with a dry soft cloth. Never use alcohol, benzene
or other chemicals. Do not use compressed air to remove dust. Ask the technician to maintain the unit
when trouble happens.
Change the background of colour OSD
Left only/R27.0.35pnd the bao f000 TD( 56 nly/R27ihe)Tj57.5881 0.0000 TDSD