Filter
Top Products
CONFIGURATION OF THE LCD
Installation Guide
Note: generally, you can press MENU to return to previous menu, and EXIT to
exit the menu, it is a default option.
- Press to select the OSD language, then press to select Auto Tuning.
Refer page 8 “Auto Tuning”.
POWER On/Off
Plug the TV into a standard outlet, making sure the output voltage and frequency
corresponds to the requirement of your machine.
When the power supply is connected, the red indicator on the front panel will be on and the
machine turns into standby state.
Push the POWER button on your remote control the indicator on the front panel will
change from red to green. And after several seconds, the system will enter the state
previously selected when it was used last time.
When finish watching, push the POWER button on your remote control to return the TV to
standby mode, The green light will change to red.
Unplug the power.