Curtis PL4210A-2 Flat Panel Television User Manual


 
29
Trouble Shooting
Before consulting service personnel, check the following chart for possible solutions.
PROBLEM SOLUTION
TV will not turn on
Make sure the power cord is plugged in.
The batteries in the remote control may be
Exhausted; replace the batteries.
No picture, no sound
Check the cable between TV and antenna/
external
AV device.
Press the power button on the remote.
Press the SOURCE button the remote, then press
the “/”button repeatedly to select the TV
source.
Poor picture, sound OK
Check the cable between TV and antenna/
external
AV device.
Try another channel, the station may have
broadcast difficulties.
Adjust the brightness/contrast in the Video menu.
Check that the unit is set to PAL
Audio noise Move any infrared equipment away from the TV.
The TFT PDP panel uses a panel consisting of sub pixels which requires sophisticated
technology to produce. However, there may be
a small number of bright or dark pixels on
the screen. These pixels will have no impact on the performance of the product.