Curtis TV2040F Flat Panel Television User Manual


 
Operation Your TV
3.Operation Your TV
With Power status On,you can also turn off the TV using the
Remote Control Hand Unit.This status is called Stand-By
mode.In this mode,You can also turn on the TV by pressing the
Channel.Up/Down keys on the front of the TV set.
3.1 Power/Stand-By ON/OFF
The TV has an Automatic Power OFF function. With no signal
condition, the TV will automatically turn off after 10 minutes.
3.2 CHANNEL Up/Down
Press[CH+]key to change
Channel Up.
Press[CH-]key to change
Channel Down.
3.3 Direct Access Tuning
Using the numeric keys on
Remote Control,Channels
can be selected directly.
2
3.4 Volume Control
Press [V+] key for Volume Up.
Press [V-] key for Volume Down.
3.5 SCAN
Press this key,channels will change automatically.
Each program will be previewed for 2 seconds,and stop at
the channel original tuned.
3.6 TV/AV Selection
You can select the AV source
which you want by pressing
the [AV]key.
3
AV1
AV2
TV/AV
v-
v+
v-
v+
-6-