Curtis TV2710 CRT Television User Manual


 
SPECIFICATIONS
Television System: NTSC/M
Receiving channel: 181 channel tuner (Frequency synthesized tuning)
Audio output: 2 speakers of 3W each
Audio output mode: RF-MONO, A/V STEREO
Antenna impedance: 75 ohm terminal
Output terminal: Video input 1vp-p/75 Ohm, audio input 400mV
Closed caption: NTSC/M receiving time (cc1-cc4/tt1-tt4)
OSD Language: English/French
Power: AC 90-130V, 50/60 Hz
Measurements
(Length Width Height):
20" – 600 x 482 x 445 (mm)
24" – 710 x 485 x 515 (mm)
27" – 777 x 500 x 577 (mm)
Net Weight: 20" – 21 kg, 24" – 28 kg and 27" – 35 kg
Accessories: one remote control
one instruction manual
two batteries (AAA)
Note: Design and specifications are subject to change without prior notice
TROUBLESHOOTING GUIDE
Should this unit exhibit a problem, check the following before seeking service:
Symptoms
Solution
T
ry different channel, if it is okay, it
is probably a station trouble
Check aerial connections on back
of set
Check aerial for broken wires
Re-orient aerial (if indoor type)
Probably local interference, such
as an appliance
Adjust fine tuning control
Adjust brightness control
Adjust contrast control
Check if station is broadcasting in
colour
Adjust colour control
Check if system switch is correct
Check if on/off switch is on
C
heck Batteries in Remote control
No picture, no sound
Poor sound, picture OK
Poor picture, sound OK