Filter
Top Products
SPATIAL
STEREO
18:30
OFF
STEREO
18:30
7
PROGRAM SELECTION (FROM 0 TO 99)
SOUND CONTROL
Volume adjustment
Use the remote control VOLUME UP (A20) / DOWN (A7) buttons or
the TV set front panel VOLUME UP / DOWN buttons (B8).
Mute
Mute the sound by pressing the remote control
SOUND MUTE button (A2).
Then,
logo is displayed. The previous sound
setting is returned after pressing the same button
a second time.
If a sound related function is used (e.g. VOLUME, 3D)
then the MUTE will also be cancelled.
Manufactured under license from Dolby Laboratories, „Dolby”
and the double-D symbol are trademarks of Dolby Laboratories.
Mono forcing, dual language
- If you are unable to get good sound
quality for a program due to poor
reception, you can force a change
from stereo to mono transmission
by pressing the remote control
MODE button (A14). Then the
program status display will indicate
„MONO” with a icon.
- On the other hand, during a
program with dual language
transmission, the MODE button
(A14) allows you to toggle between
the fi rst and second language. The
program status display will indicate
„DUAL 1” or „DUAL 2” (plus NICAM
according to the received signal).
- To return to initial state, press again
the MODE button (A14).
Sound eff ects
A SPATIAL sound eff ect is available, using the remote
control 3D (A13) button.
The following display appears:
To return to initial sound eff ect, press again the 3D (A13) button.
The following display appears:
As an option, the sound eff ects PANORAMA and Dolby Virtual are
available with the same button. For other adjustments such as
BALANCE, EQUALIZER or AVL(option), use the SOUND menu
(page10).
Direct selection
Use the remote control NUMBER 0….9 buttons (A3).
For two digits program numbers, enter the second digit within 2 seconds.
Up / Down selection
Use the remote control PROGRAM UP (A6) / DOWN (A21) buttons or the
TV set front panel PROGRAM UP / DOWN buttons (B9).
Spatial sound eff ect
Sound transmission mode
Clock
No sound eff ect
Sound transmission mode
Clock