Daewoo 21Q4 CRT Television User Manual


 
22
TDA6106Q ( Video Output Amplifier )
(1) General Description
The TDA6106Q is a monolithic video output amplifier (5MHz bandwidth) in a SIL 9 MPpackage, using high-voltage
DMOS technology, and is intended to drive the cathode of CRT directly .
To obtain maximum performance, the amplifier should be used with black-current control.
(2) Feature
Black - current measurement output for automatic black current stabilization (ABS)
Single supply voltage of 200V
Internal protection against positive appearing CRT flash-over discharge
Protection against ESD
Internal 2.5V reference circuit
Controllable switch-off behavior
(3) Block Diagram
(4) Pin Description
PIN SYMBOL DESCRIPTION
1 N.C
2 N.C
3 V in inverting input
4 GND ground, substrate
5 I om Black-current measurement output
6 V dd supply voltage high
7 N.C
8 V oc cathode output
9 V of feedback/transient output